Full Sail Partners Blog | Deltek Vision (9)

Are you ready? Year-end is upon us. We thought we would highlight some resources to assist firms with year-end processing.

Don't Forget Your Deltek Vision Year End Processes

As we come into the holiday season many of us in accounting face the coming season, not only with the joy of family and friends coming together, but with a sense of impending dread – YEAR-END and TAX SEASON are looming – ugh - have another drink.

W-2s - 1099s - journal entries - checking and double checking each number!  Auditors - shareholder meetings - endless explanations’ of what the results mean (even though you have been saying for the past 6 months) - Oh the joy of the season!

As we go through the year-end process there are mistakes we (and others) make that are easy to recover from like entering the 15 page depreciation journal entry “backwards” at midnight sitting in your semi dark office chugging your 15th pot of coffee.  Some are more difficult – like removing all the lower levels of your work break-down structure (did that once – glad our backups worked). So outside of deleting the database, what are some of the items in Vision year end processing that are hard to recover from?

>> Learn more

Is Your Deltek Vision System Year End Process Stress Free?

Year-end is always a stressful time of year, but it doesn’t have to be.  As with everything else in the world of Accounting, planning and preparation is the key to a successful and stress-free year end. Check out this article talk provides a few tips to make your year-end close just a little easier.

>> Prepare more

Webinar: Stress Free Year-End Process - Yes You Can!

Join our on-demand webinar to see how you can make your year-end stress free.  Our panel will provide insight into best practices, tips to close your books with ease, and focus on those “gotchas” on year-end processes. See what our panel says about the following year-end items:

1. How to make your process efficient
2. Avoid disruption to production
3. Communication topics to provide your staff and management
4. Saving money by evading closing obstacles

>> View more

Deltek’s Year End Resources

Deltek Customer Care is working to assist you with year-end activities. You can now take advantage of year-end resources:

• Year-End Forums

• Phone Menu Guidance

• Year-End Info Center

• Quick Chat Guidance

• Year-End Guides & Videos

>> Know more

We hope these resources serve as good reminder. Best wishes from the Full Sail Partners' staff! Wishing you a prosperous 2014.

You might be tempted to think that the hardest part of using business performance metrics to guide your business is gathering and analyzing the metrics. 

But equally important — maybe even more so — is selecting the right metrics to begin with. Of course, there are some people who observe that there are no “bad metrics.” The argument goes that a metric itself is neither good nor bad; it could be just as likely that your data is wrong, or possibly that the metric is simply not a good fit for your needs or your organization. 

But even though the metric itself is neither good nor bad, there are other ways that business performance metrics can be failing you. Let me describe three of the most common problems. 

1. Inconsistency. One of the most common ways a metric can go south is inconsistency. Granted, some people think consistency is overrated: the philosopher Ralph Waldo Emerson once railed in his classic essay, Self-Reliance, that “A foolish consistency is the hobgoblin of little minds.” (It’s good stuff — look it up!)

2. Unintended consequences. Another problem is if your metrics are somehow incentivizing your employees to do the wrong thing. For example, imagine your firm has put a recent focus on customer service. Unfortunately, last year you notified all employees that their pay raises will be based on employee utilization rates. The longer your employees spend keeping your clients happy (non-billable work), the lower their utilization rate. You are telling your employees one thing, but your actions are saying the complete opposite.

Although it should go without saying, it’s absolutely critical to make sure that the math and logic that feed into your business performance metrics remain consistent, regardless of the timeframe or operating unit being analyzed. 

So in this example, a better metric would be to incentivize your employees on a combination of utilization rate and customer satisfaction — more complicated to gather, but ultimately closer to what you want to reward and encourage. What’s more, a great reason to plan your metrics with care! 

3. Understanding Lagging vs. Leading Indicators. To be most effective, you need business performance metrics in as close to real-time as possible. Understanding the difference between lagging vs leading indicators can often be the defining factor for setting your firm on the correct course. Lagging indicators help your firm indentify historical trend information, while leading indicators provide predictive information that can allow you to make data-driven decisions to change future outcomes.

QuickBooks, Excel and other office applications can help in collecting and analyzing data, but lacks the sophistication to provide real-time insight. A purpose built ERP, like Deltek Vision, provides front and back office functions insight into historical and predictive information. Whatever tools you use to gather your metrics, be sure to automate the process as much as possible to provide your team with the ability to make the best data-driven decisions.

Start measuring!

So how does one avoid the pitfalls of metric management? A great starting point is to understand your business and what your version of success looks like. For example, is it total revenue, net profits, other measures, or a weighted combination? 

At Full Sail Partners, we work with a large number of professional services firms — especially those that are project-based. As a result, we have a lot of insight and experience into the metrics that are most telling for them. To learn more, keep exploring our blogs, or contact us.

 

Activities provide a greater way to gain visibility into communication efforts across the firm about a client. They provide a detailed view of what is going on with a project/firm/opportunity and are critical for providing team backup and covering your backside.  You are probably aware of three main ways to create activities in Deltek Vision – Manually (slow), Using MODI (faster but limited), and CMO (even faster but costs more $$).  The innovation team here at Full Sail Partners has developed a fourth way, the fastest, easiest, most convenient way to create activities so far:  Just do your timesheet and let the activities be created for you! 

The way it works is quite simple, just enter your hours, as well as, a detailed comment regarding work done for a project on your timesheet and make sure the first character in the comment is a tilde symbol (~).  Save your entry and close your Deltek Vision timesheet.  Overnight all the timesheets will be scanned and those that start with the special character will have activities generated for them.  Additionally the leading character will be changed from the tilde to a carot (^) to signal that an activity has been created for this entry.  Once your Deltek Vision timesheets are closed out and before billing is run all special characters are removed. 

So just by adding one additional character to my timesheet, this: 

Becomes this:

 

This is a great way for you to “kill two birds with one stone” (well maim them maybe) – Keeping your timesheet up-to-date and relevant (making accounting happy) and providing the CYA and team insight into your progress on the project (making management happy). Want to learn more about this and other Full Sail Partners solutions?

Here we are ½ way through the year, and yet my ‘to-do’ list has kept growing.  In today’s economy we have all been asked to do more with less help.  This often requires us to take on more responsibility and daily tasks - which causes us more stress, longer hours and greater chances to ‘mess up’ -  so to speak.

What to do? What to do?  Through workflows, Deltek Vision offers us an opportunity to automate many of the repetitive tasks we have to do every day – that quite often fall through the cracks of our busy, busy days (and hopefully not too many nights).

What is a workflow? 

You might ask, what is a workflow? Workflows are actions that your Deltek Vision system will carry out for you based on events that occur within specific Info Centers.  An example of this is sending an email to an employee when their name is added as the Project Manager on a project.

Can I do this?

In many cases you can do a lot of the automation on your own.   Deltek's intuitive design allows “non-programmers” to create workflows and actions for many repetitive task. 

To do this, you will need to know a couple of things.  First – where are workflows found?  They are found in Configuration --> Workflows (guess that wasn’t too hard).

Next you need to understand the different options under workflows. Watch this highlight video to better understand the options under workflows, and the actions that can be performed: 

 

So you see that using the standard workflows in Vision can help you with many repetitive tasks that are triggered from actions taken within Vision.  Making these automated will free you and your staff up to pursue more productive workdays and more fun nights.

But wait you say, how do I actually set up these workflows? That's a great question!  If you still are asking, what is a workflow, watch the full length video on Workflows and Stored Procedures. Learn how to set up workflows in your Deltek Vision system today! 

 

 

In order to truly gain a holistic view of the organization, there are key financial ratios and indicators that project-based firms should focus upon at regular intervals. Some key project performance metrics need to be monitored on a real-time basis, or at least weekly, while others are more relevant on a monthly basis. Also, because firms must first win projects and engage in other activities that do not directly produce revenue, project-based firms should also regularly monitor firm-wide metrics.

We should not focus on a single metric but rather, should adopt a more comprehensive view and monitor a handful of key metrics. For example, firms might reach the target for their Net Effective Multiplier (NEM) and yet have too few revenue producing projects, too much overhead, and poor utilization rates.

Key Project Performance Metrics for Management

At a minimum, firms should monitor their Net Effective Multiplier (NEM) on a monthly basis. The NEM is calculated by dividing net services revenue by direct labor, which is the cost of labor charged to projects. Net service revenue is total revenue less direct cost (i.e., Direct and Reimbursable Consultants and Expenses).

Most firms would like to see a multiplier that is better than 3 times direct labor. In its recent AE Clarity Report for 2012, Deltek reported an average of 2.9 with top performing firms reporting 3.43.

One way higher performing firms achieve a better NEM is by assigning appropriate resources to their projects. More experienced resources are typically very productive, but their higher labor cost drives the NEM downward. Thus, it is important to assign the resources with the right level of expertise to complete the task at hand.

Some firms prefer to report and monitor the Realization Ratio in lieu of the NEM. The Realization Ratio is calculated by dividing net services revenue by direct labor at billing rates instead of cost rates. A target Realization Ratio would be greater than 1.

On at least a weekly basis, if not real-time, firms should monitor Project Estimate-to-Complete (ETC) and Estimate-at-Completion (EAC) values. ETC amounts are how much additional money must be spent from tomorrow through the end of the project to complete the work. EAC amounts are how much total money you expect to have spent at the end of the project. This is calculated as the job-to-date costs plus the estimate-to-complete costs. ETC amounts can be calculated simply by maintaining schedules. With a timeline defined, ETC amounts are simply future scheduled amounts at either cost or billing rates.

Best Practices Tips: To monitor ETC and EAC amounts in real-time, it’s a best practice to complete timesheets on a daily basis. Additionally, to establish a proper Project Work Breakdown Structure, subdivide a project into smaller more manageable components (e.g., phases and tasks) to maintain schedules and monitor these amounts. Ideally, EAC amounts will not exceed budgets but by monitoring these calculations weekly, firms are better able to keep projects on track and the work within scope. 

Key Firm-Wide Management Metrics

Firms should monitor their utilization and overhead rates on a monthly basis, at a minimum. The Utilization Rate is calculated by dividing the cost of labor charged to projects by the total labor cost of the firm. In the early referenced Deltek's 2012 AE Clarity Report, the average employee utilization rate was reported as 59.8%. Excluding vacation, holiday, and sick time it was 65.4%.

Firms can improve employee utilization by setting realistic utilization targets, properly allocating resources, managing client expectations, and having employees monitor their performance against their target, real-time, while completing timesheets each day. The Overhead Rate is calculated by dividing total overhead (before distributions) by total direct labor expense. Typically, bonuses are excluded from overhead for this calculation.

An interesting finding from Deltek’s AE Clarity Report was the average overhead rate for 2012 which was 161.6% with bonuses excluded and 175.7% with bonuses. Rates were not significantly different for higher performing firms suggesting they had achieved higher project profitability with better NEMs and better utilization rates.

The bottom line is that there is no magic bullet but rather a handful of key project performance metrics firms should monitor at regular intervals to maintain profitability. Does your firm have a global view of your firm metrics? Schedule a demo today to see how Deltek Vision is an ERP specifically designed to provide access to these key metrics and many more. 

 

In this Deltek Vision How-To Video, we will demonstrate how to configure a graph from a Deltek Vision report to display on your dashboard. Firms that optimize their dashboard gain greater visibility into to their company as a whole.

 

Looking for more information on how to optimize your Deltek Vision system? Check out these other How-To videos.

One of the most important tasks within any organization is lead management.  It is vital for the sales staff to have the most comprehensive and up to date information available on a new lead.  With this information the sales or marketing team can seamlessly follow the Lead qualification processes established by your firm.  Once it has been established that a Lead is a qualified prospect, it is time to convert the lead into a company, opportunity and/or contact.

Did you know that you don’t have to create each record in the respective info centers and enter the same information over and over?  Vision can use the information from the Leads Info Center to create the Company, Opportunity and Contacts records in a few easy steps.  Here is how it works… In the lead info center menu, there is a “Convert” option. 

 

By choosing this option, you will receive a dialogue box that is defaulted to qualify the lead.  There is also the option to disqualify a lead if need be, but we will focus on lead qualification. 

Within the dialogue box you will have the option to convert the information entered into the Leads info center over to a company, contact or opportunity.  You may only want to convert this lead to a contact or maybe you only want to have them set up in the company and contact info centers, you can do so by checking only the radial button next to those options. 

 

You may also want to associate this lead with the corresponding Marketing Campaign that brought you the Lead.   The appropriate campaign may be selected from the drop down box at the bottom of the dialogue box. 

Once you have checked the appropriate options and associated the Lead with a marketing campaign (if appropriate), you will select the ok button.  Vision will create a new Company, Contact and Opportunity for this Lead.  All the corresponding information such as Company name, address, phone number, e-mail address, company  type, etc for this Lead will be copied into the fields in the new records created in the Company, Contacts and/or Opportunity info centers you have selected. 

Your company now has all of the lead management information necessary to track this client in the Client Info Center, including associating the new contact record with the company.  Within the newly created opportunity is all the vital data your sales team will need to engage and move forward with the sales process.  The transfer of this information has been done without the need to manually copy and paste between the info centers.  Vision has copied the information for you within seconds and the focus can now turn from qualifying the Lead to managing the sales process and closing the deal.  

Learn more about Deltek Vision CRM.

In today’s day and age of fast changing technology, firms must stay abreast of all available solutions to better compete with competition, and win work. Since the ‘great recession’ of 2009, competition on winning work has increased exponentially. Successful firms have combated this increased competition by staying current with technology, and using well thought out techniques to win projects. Included below are five tips that will help your firm better impress clients, and ultimately win more work.

1. Collaboratively share information with your project team. When responding to a client request / RFP, sharing data can become a cumbersome task in itself when working with remote teaming partners or staff. Often, the ability to seamlessly coordinate tasks/assignments, or share large files amongst your team can be the difference in winning or losing the work. To avoid these types of hiccups, leverage collaborative sharing tools such as Deltek Kona to keep your project team on the same page. Deltek Kona allows users to share files, and schedule important dates, seamlessly as though the users were all working in the same centralized office. You will be amazed at how Kona will empower your project team!
    
2. Hasten your proposals process through the use of templates. Unfortunately, many times firms will find out a about a project that they are a perfect fit for days before the due date. These time restrictions can ensnare the proposal process and make it difficult to respond sufficiently. Empower your marketing/business development department by creating templates that will allow you to export your information from Deltek Vision CRM to Microsoft Word or InDesign. This will allow you to streamline the proposal process, and concentrate on the areas of the proposal that require custom attention.
    
3. Avoid boring old PowerPoint presentation. Many firms make it to the short-list process only to utterly disappoint the client through the use of a boring, stale PowerPoint presentation. If you are unable to separate yourself from your competition, you are not doing your best to win projects. PowerPoint has been around since the late 1990’s, and sadly a large majority of presentations look like they came out of that same era. By using presentation software such as Prezi or PreZentit, your firm can immediately stand apart from your competition. With that said, don’t forget the importance of impressing the client by being personable and demonstrating your understanding the project. Overly relying on the use of presentation software is one of the quickest ways to lose a client’s attention.
    
4. Use a CRM solution to track relationships. We have all heard the saying, “It’s not what you know, but who you know!” This begs the question; does your firm know who it knows? If you are not tracking your relationships through CRM software such as Deltek Vision, then you are simply throwing darts at a board, blindfolded. A CRM solution will allow you to track who you know, recent conversations, and other important relationship data such as birthdays or anniversaries. This type of knowledge insight is important for creating meaningful relationships between your company, and your clients.
    
5. Optimize information for smart devices. If you own a smart device, and you have not optimized your marketing contact the device, you are not working smart! You never know when, or where, you might bump in to a perspective client. If you are unable to demonstrate your firms expertise at the drop of a hat, expect to lose out on a lot of potential work. Your firms website should be optimized for smart devices (iPhones, Androids, Tablets, Everything!) allowing you to be ready to show off how great your firm is, at a moment’s notice! In addition to optimizing your website for these smart devices, take the initiative to pre-load content on to your smart phone, in case you are unable to get internet service! By doing this, you will not only impress the client with all of your great works, but you will also demonstrate your ability to think ahead and be ready for the unexpected.
   
   If your firm is utilizing Deltek Vision CRM, make sure to check out Vision Unleashed. Vision Unleashed will allow you to access your full Vision system on teh go, from a mobile device. It also allows MAC users to access Vision without the need for running parallels or bootcamp. This allows MAC users to utilize their workstation to it maximum potential without dedicating resources to addition process just to access Vision!

I hope you learned something from this blog. Some of these technologies or techniques might seem obvious, but unfortunately many times it’s the obvious omissions that cause us to lose out on winning new work. If you use any of the concepts highlighted in this blog, make sure to comment below and let us know. We love to hear success stories!

Once you win your next project, make sure to review these project management concepts.

In this Deltek Vision How-To Video, we will demonstrate how to apply hotfixes to your Deltek Vision server.  Thanks to the introduction of cumulative updates, applying hotfixes is easier than ever.

I was talking recently with a prospective client who observed that his firm had outgrown QuickBooks (QB). The conversation eventually led to a discussion of the advantages of ERP systems over back office accounting systems — which include not only efficiency gains, but strategic improvements as well. 

Being in the ERP implementation business, we hear a lot of customers express frustration over outgrowing QB, so I asked my prospect what it meant specifically for his firm. Off the top of his head, he named several pain points:

• First, their QB systems were disconnected, so there was no particular place where management could view financial performance overall, let alone broken out by project manager or client. 
• QB could display AR for a specific client, but offered little in the way of project information regarding specific services or deliverables. 
• Last but not least, correspondence for each client was buried in various public folders on the firm’s file server. To make matters worse, the correspondence trail was incomplete due to users’ not following the correspondence logging protocol. 

After hearing these insights, plenty of examples came to mind of ways that even a small- to mid-size firm like his could benefit from an ERP system. I mentioned a few of the most basic advantages of ERP systems over back office accounting: the value of integrated data, open architecture and user customizations.  

I also pointed out that thanks to the evolution of niche ERP systems, small firms CAN get the type of functionality that used to be available only to firms with deep pockets. In fact, it’s now quite easy to implement an ERP system that not only addresses the accounting function, but also facilitates the firm’s core processes and way of doing business. 

The Need For Visibility

My colleague next mentioned how his firm actually had strong AR, and good visibility into its cash and cash management. The problem, he said, was that the organization lacked the visibility needed to help back office management play a more significant role in decisions affecting the firm as a whole. By the same token, it was difficult to get project managers more involved in the fiscal responsibility that goes with managing client expectations. 

I pointed out that there were several other major advantages of ERP systems over basic accounting packages. The ERP concept excels at addressing the front end of the project life cycle, by facilitating tracking of projects and providing visibility. Specific examples include:

• Managing data obtained through the business development process
• Generating opportunity notifications and creating process flow through workflows and alerts to improve efficiencies and win rate
• Forecasting for opportunities and already-awarded projects regarding not only revenue, but staffing requirements as well
• Providing for audit trails of communication with clients, contacts and opportunities and supporting technical staff in the delivery of services under specific projects
• Facilitating communication with accounting early in the business development phase regarding terms, rates, related documents and specific contract requirements
• Integrating with desktop tools like Outlook, Word and PowerPoint to facilitate email communication and automate creation of proposal, estimating and contracting documents 

I then suggested we establish a value proposition for the level of investment that would be needed at this critical juncture in the firm’s transition from QuickBooks. This is where my prospect’s eyes started to get big, as he saw how much time, factored by associated hourly costs, was being spent on efforts that an ERP system could automate. 

We assessed values for each of the existing manual processes, and compared them with the reduced time and effort involved using the ERP approach. The resulting savings would go right to the firm’s bottom line. But as significant as those savings would be, I added, the real impact would come from the improved quality of the work environment, better communication with clients, and most importantly, increased opportunities for success. 

See how today’s success-minded firms require a laser-like focus on strong project and financial management practices by downloading the whitepaper on Growth and Transition Strategies.